11
■ AC Adapter Specifications
Operation Spec.
Input 100 ~ 240V
1.0A MAX 50~60Hz
Output
+5.0V
2.0A
●
Connecting the AC adapter
Turn the camera off and follow the instructions below:
Open the connector cover and
connect one end of the AC
adapter to the DC-in jack on
the camera.
Connect the other end to an
electrical outlet.
The following product has been tested and approved for use at the 5V setting:
Brand: RadioShack. Product: Digital Camera Power Adapter
Catalog #: 273-1696 Model: 273-1696
AC Adapter
Make sure the AC adapter is accordance with the above
specifications to avoid causing damage to the camera.
This camera cannot be used as a battery charger. Do not
attempt to charge batteries in the camera.
To Next Page
Loading...
Need help?
General
