16
●
Power Supply
Press the Power Button to turn on the camera; press the Power Button again
to turn it off.
●
LED Indicators
The following table explains the Self-Timer LED (located in the front of
camera) and the Status LED (located in the rear of camera):
Status Meaning
Red Blinking Busy
Status
LED
Green On Camera on and in standby.
Self-timer
LED
Red Blinking
Self-timer activated.
Blinks rapidly for 3
seconds prior to flash.
Power On and LED Indicators
Without user input, the camera will turn OFF
automatically (default: 3 minutes).
You can select idle-off times. (See “Setup”).
To Next Page
Loading...
Need help?
General
