38
■ Slideshow
Slideshow plays back images (but not videos) automatically in sequential
order. You can adjust the slideshow display interval within the range of 1
second to 10 seconds. Select
menu, and press the (up arrow) /
(down arrow) to increase or decrease the interval. The and
symbols are to enable or disable the repeat function, respectively. Select the
menu item and press the
(center) to enable or disable the repeat
function.
After completing settings, go to the
menu and press the to play.
If there is no image stored in the internal memory or memory card, the
following message will appear on the LCD display:
■
DPOF
DPOF allows embedded printing information on stored images. With DPOF
you can insert the memory card into a DPOF compatible printer and print
your stored images to print in varying quantities and with or without dates.
Set Each: to set the printing quantity for each image one by one; press
the
(up arrow) / (down arrow) to increase or decrease the
desired print quantity; press the
(left arrow) / (right arrow) to
select the previous or next image.
Set All: set all images to the same print quantity.
Date On/Off: press (center) to enable or disable the printing of date
on the images.
■
Removable Device
Your computer’s operating system treats the camera like a removable mass
storage device when it is attached to the computer. When you attach the
camera, "USB MSDC" appears on the LCD display and you can transfer files
between the camera and the computer. (See File Transfer section)
To Next Page
Loading...
Need help?
General
