Dyna-Flo 360 - User Manual

Model 360/361 Control Valves
Dyna-Flo Control Valve Services Ltd.
Phone: 780 • 469 • 4000 Toll Free: 1 • 866 • 396 • 2356 Fax: 780 • 469 • 4035 Website: www.dynafl o.com
P-360M1019A
1
Operation, Parts, and Instruction Manual
TABLE OF CONTENTS
General 2 Lapping 13
Scope 2 Assembly 15
Specifi cations 3 Stud Installation 15
Unpacking 5 Plug Seal Assembly 15
Installation 5 Trim Parts Assembly 19
Air Piping 6 Bonnet Installation 20
Periodic Inspection 7 Packing Installation 21
Actuator Removal 7 Globe Valve Cross Section - Figure 32 26
Maintenance 8 Angle Valve Cross Section - Figure 34 28
Packing Maintenance 8 Body to Bonnet Stud Torque - Table 5 32
Disassembly 9 Packing Nut Torque - Table 6 32
Packing Removal 9 Valve Stem Connection Information - Table 7 32
Bonnet Removal 9 Parts 33
Trim Parts Removal 11 Model Builder 49
Packing Parts Removal 11
Plug Seal Removal 12
Figure 1 360 Control
Valve & DFC Actuator

Summary

General Information and Safety

General Instructions

Provides general instructions and warnings for operating and maintaining the valve.

Safety Precautions

Outlines critical safety warnings and best practices for valve installation and maintenance.

Valve Specifications

Valve Configurations and Sizes

Details the valve's configurations, available sizes, and connection styles.

Installation and Setup

Installation Procedures

Step-by-step guide for installing the valve in the pipeline.

Inspection, Maintenance, and Troubleshooting

Actuator Removal

Valve Maintenance

General guidelines for valve maintenance.

Disassembly, Lapping, and Assembly

Plug Seal Removal

Assembly Overview

General guidelines and prerequisites for valve assembly.

Plug Seal Assembly

Bonnet Installation

Packing Installation

Detailed steps for installing various types of valve packing.

Dyna-Flo 360 Specifications

General

Brand	Dyna-Flo
Model	360
Category	Control Unit
Language	English