Dynamic DX - 4.3 Power Module Programmable Parameters

No. 60027, Issue 4. January 1998
7 Programming28
7.1.1 Adding an SLM to the DX System
Any DX Remote can be used to control either conventional or servo steered DX
Systems. While it is possible to edit a conventional wheelchair program to a servo
application using the PCD, the complexity of the operation makes it inadvisable.
When changing to a servo steered system, select a servo wheelchair program and
modify to suit the requirements of the wheelchair type.
Similarly, to change a DX Remote from a servo to a conventional application, select
a conventional wheelchair program to edit as required and download to the DX
Remote.