No. 60027, Issue 4. January 1998
7 Programming44
7.4 Using the PCD
Programmable parameters relating to the SLM are contained in the DX Remote
(UCM Remote) and the SLM programs. These programs can be modified using
the PCD (Programming Configuration Diagnostic) tool.
To view and / or edit these parameters:
1. Enter the PCD's Main Menu screen as described in the PCD Manual.
2. Select the "Edit Wheelchair Library" menu option.
3. Select either "Edit Standard Wheelchair Program" or "Edit Custom
Wheelchair Program" where appropriate.
4. Select the chair program that you wish to view or edit.
5. Select the "Edit Module Parameters" menu option.
6. Select "SLM" or "UCM Remote".
7. Scroll through the list of parameters. See sections 7.2 and 7.3 for the list of
parameters that require programming and their functions. Adjust parameters
as required.
8. Press 'ENTER' to accept the changes or 'ESC' to exit without saving. Select
"Write Program to Library" option and press 'ENTER'. These values will now
be part of the Standard Wheelchair Program for this type of wheelchair and
be automatically downloaded to the DX Remote and the SLM when using the
"Program Wheelchair" option.
To Next Page
Loading...
Need help?
General
