Dynapac DR6X - Checking the Fuel Level; Topping up Fuel

5.4 Checking the fuel level; topping up fuel
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
–
Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and
other sources of ignition.
– Do not spill any gasoline.
NOTICE!
Danger of engine damage!
– Monitor the entire refuelling process.
– Contaminated fuel can cause malfunction or
even damage of the engine. If necessary, fill in
fuel through a screen filter.
– Use only fuel of the permitted specification
Ä Chapter 8.2.2 „Fuel“ on page 65.
Protective equipment:
n
W
orking clothes
n
Safety shoes
n
Protective gloves
1. Clean the area around the filling port.
2. Remove the cap and check the filling level visually
.
3. Fill in fuel through a funnel with screen filter
.
4. Close the cap.
B-541-0068
Fig. 19
Checks prior to start up – Checking the fuel level; topping up fuel
DR6X
45