6.3 Operation
Guide the machine only by the guide handle.
Guide the machine so that your hands do not hit against solid
objects.
For longer work breaks you should always park the machine is
safe condition
Ä
Chapter 6.4 „Parking the machine in secured con-
dition“ on page 55.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Keep your feet clear of the tamper foot plate.
–
Always hold on to a running machine.
– Always keep an eye on a running machine.
WARNING!
Loss of hearing caused by too high noise bur-
dens!
– Wear your personal protective equipment (ear
protection).
The layer thickness of the material to be com-
pacted should not be higher than is possible for the
vibratory tamper to cope with.
Protective equipment:
n
Hearing protection
n
Safety shoes
1. Set the throttle lever to position “MAX”.
ð
The machine works with highest frequency.
Fig. 30
Operation – Operation
DR6X
53
To Next Page
Loading...