Dynapac DR6X - As Required; Cleaning the Machine; Checking, Cleaning the Spark Plug

8.10 As required
8.10.1
Cleaning the machine
NOTICE!
Danger of engine damage caused by reduced
cooling!
– Immediately remove any oil or fuel leaks near
fuel tank, cylinders or cooling air intake.
Protective equipment:
n
W
orking clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely
Ä Chapter 6.4 „Parking the machine
in secured condition“ on page 55.
2. Allow the engine to cool down.
NOTICE!
Components can be damaged by water
entering into the system!
– Do not guide the water jet directly into the air
intake and the recoil starter .
3. Clean the machine with a water jet.
4. W
arm up the engine for a while to avoid corrosion.
8.10.2 Checking, cleaning the spark plug
NOTICE!
Danger of engine damage!
– Do not use spark plugs with incorrect heat
value.
OFF
ON
START
OIL
B-541-0084
Fig. 115
Maintenance – As required
DR6X
96