Dynascan DS2 DS322LR4-1 User Manual

DS322LR4-1 User Manual 6
Getting Started
Contents
Confirm that the accessories below are shipped along with the display. If any item is missing, please
contact your dealer. The color and shape of the accessories may vary with the products.
• DS322LR4-1 Professional LCD.
• Remote Control x 1 pc.
• Batteries (1.5V / AAA) x2 pcs.
• Quick Start Guide x1 pc.
• Power cable x1 pc.
• RS-232 cable x1 pc.
• DVI cable x1 pc.
• Ethernet crossover cable x1 pc.
Attention: Please use the following table to check whether the included power cord is suitable for your
region. If the power cord does not match your region, please contact your local supplier. Please
use matching AC socket in order to meet your local safety regulations.
Plug Type
North America
European
Continental
Japan Taiwan
Plug
Shape
Region
U.S.A. / Canada
EU
(Except U.K.)
Japan Taiwan
Voltage
120V 230V 100V 110V
Installing and Replacing Remote Control Batteries
1. Open the battery compartment cover.
2. Insert 2 new AAA batteries.
3. Close the battery compartment cover.
Warning:
• Incorrect usage of batteries may cause leakage or explosion.
• Pay attention to the polarity when installing the batteries.
• Do not mix different types of batteries or new and used batteries. Doing so may shorten the
battery life or cause leakage.
• Remove or replace the batteries when they are empty in order to prevent acid leaking in the
battery compartment.
• Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so
may hurt human skin.
Note: If the remote control is not going to be used for a long time, we recommend removing the
batteries from the remote control.

Dynascan DS2 DS322LR4-1 Specifications

General

Brand	Dynascan
Model	DS2 DS322LR4-1
Category	Monitor
Language	English