1290 Strain Gage Input Indicator 27
This status is displayed when the A/D converter value is out of range, or the input signal is greater
than full scale value plus 27% of span, or the displayed value exceeds the display capability of
99900.
- o o o o
Under-range indication
This status is displayed when the A/D converter value is out of range, or the input signal is lower
than low scale value minus 27% of span, or the displayed value exceeds the display capability of -
1990.
OPEn
This message is displayed when the instrument detects an input on any one of the four transducer
leads.
8. REPAIR
Questions concerning warranty, repair cost, delivery, and requests for a RA# should be directed to
the Dynisco Repair Department, 508-541-9400 or email: repair@dynisco.com. Please call for a
return authorization number (RA#) before returning any product. Damaged products should be
returned to:
DYNISCO LLC
Attn: RA # _______________
38 Forge Parkway
Franklin, MA 02038
For technical assistance please call 800-DYNISCO or 508-541-9400 or fax 508-541-9436.
9. WARRANTY
This Dynisco product is warranted under terms and conditions set forth in the Dynisco Web Pages.
Go to www.dynisco.com and click on “Warranty” at the bottom of any page for complete details.
To Next Page
Loading...
Need help?
General
