Dynisco 1290 User Manual

6
2. SPECIFICATIONS
2.1 GENERAL
Case PC/ABS, Black
Self-extinguishing, level V-0, per UL 94
Dimensions 48 mm high x 96 mm wide x 144 mm deep
(1.89 in. high x 3.78 in. wide x 5.67 in. deep)
1/8 DIN per DIN 43700
Installation Panel mounted, secured by mounting frame
Cut-out 45 mm high x 92 mm wide, +0.8 mm/-0 mm
(1.77 in. high x 3.62 in. wide, +0.03 in./-0 in.)
Front panel IP 65 protection per IEC 569/CEI 70-1
Rear terminal block 22 screw terminals with safety cover
Display 5 red LED digits, 13.2 mm high
7 segments plus decimal point
Indicators 2 red LEDs for alarm annunciator function
1 red LED for local/remote control
Keyboard Four pushbuttons
Sampling time 100 ms typical
Display update time 400 ms
Common mode rejection ratio 120 dB @ 50/60 Hz
Accuracy ± 0.1% fsv ±1 digit @ 25°C
Temperature drift Less than 200ppm/°C of fsv
Insulation resistance Greater than 100 Mohm, per IEC 348
Dielectric strength 1500 V rms, per IEC 348
Power supply Switching 85/264 VAC, 50/60 Hz
(24 VDC ± 10% factory order option)

Dynisco 1290 Specifications

General

Brand	Dynisco
Model	1290
Category	Touch Panel
Language	English