Display
LCD backlit Display, White/Black 128 x 128 pixel with white LEDs.
CAUTION:
If the instrument is exposed to extremely high or extremely low temperatures, the quality of the display
may be temporarily impaired. Display appearance may be improved by acting on the contrast key.
Date, time and battery status.
Selected menu.
Parameters relative to the selected menu.
Context keys. In the various menus the functions vary depending on
the type of operation being carried out.
B-Type USB connector
Connector to connect the device to a personal computer or to the battery charger.
The device comes with a wall charger with 5V , 2A output to charge the internal batteries.
'T1' Connector
Used to connect the Tc-K male connector of the gas temperature probe.
'P-' pneumatic connector
Negative input (P-) to be used for the connection of the gas aspiration probe; to this input, must be connected
the second branch (with the largest pneumatic connection) of the gas probe for the measurement of the draft
and the combustion analysis.
'IN' pneumatic connector
Input for the connection of the branch of the gas sampling probe with the condensation separating and
anti-dust filter assembly.
'P+' pneumatic connector
Positive input (P+): used for the pressure measurements values.
Gas output
Magnets
Instrument data label.
15/06/18 10:00
Text 01
Text 02
Text 03
Text 04
Text 05
Text 06
Print
To Next Page
Loading...
