E Instruments E500 - Menu→Configuration→Print

49
>
9.4.4 Menu→Configuration→Print
PARAMETER
DESCRIPTION
Copy number
Sets the number of ticket copy to be printed.
This is a valid setting only if a printer has been selected.
Printer
Select the type of printer with which the ticket is printed:
BT: Bluetooth
®
- at the first start up it is necessary to perform the paring
procedure described below. (if the instrument version foresees it)
IR: Infrared.
OFF
: none - the printer is turned off.
Mode
This parameter is visible only if the IR printer has been selected.
Selects the printing speed of the IR printer between ‘fast’ and ‘slow’.
Select 'slow' in order to make the printing process compatible when an HP IR
printer is used.
QR code
QR code generation (if the instrument version foresees it):
ON:
pushing the button related to the interactive function “Print” the instrument
generates a QR code, which can be read with the “E Instruments Analyzer App”
and allows to download the data acquired of the performed combustion analysis
and the additional measures.
OFF: the QR code will not be shown.
Pairing BT
(If the instrument foresees
the on-board Bluetooth
interface)
Carry out the instrument association procedure to pair the Bluetooth
®
printer.
15/06/18 10:00
PRINT
►Copy number 1
Printer IR
Mode fast
QR code ON
Pairing BT
KEY FUNCTION
OK
Enters the modification mode of the
selected data and then confirms it.
>
Selects the available parameters.
In modification mode, scrolls the availa-
ble values.
ESC
When pressed in modify mode cancels
the selection made, otherwise returns to
the previous screen.