E Instruments E500 - Menu→Configuration

28
>
9.4 Menu→Configuration
SUB MENU FUNCTION
Analysis
Through this menu the user, can set the different reference parameters of the
instrument in order to perform the combustion analysis.
SEE CHAPTER 9.4.1
Instrument
Through this menu the user, can set the different reference parameters of the
instrument.
SEE CHAPTER 9.4.2
Alarm
Alarm management - In this menu it is possible to set and store only one alarm
of
which it is possible to define the observed gas, the intervention threshold and
the
kind of alarm: Minimum, Maximum or Off.
The Minimum alarm type will ring when
the
measured gas drops below the set threshold, while the Maximum alarm type
will ring when the measured gas goes above the set threshold. If the alarm is in
Off mode, it is deactivated.
Alarm Alarm
Gas Concentration
Maximum Alarm
Threshold
Measured
Value
Threshold
Time
Minimum Alarm
Alarm
SEE CHAPTER 9.4.3
Print
This menu allows the user to set the printing parameters, such as copy number,
printer type (OFF, BT or IR) and the visualization of the QR
code so to download
the data of the performed analysis.
SEE CHAPTER 9.4.4
Language
Select the desired language of the instrument.
SEE CHAPTER 9.4.5
Reset
Reset default data.
SEE CHAPTER 9.4.6
15/06/18 10:00
CONFIGURATION
►Analysis
Instrument
Alarm
Print
Language
Reset
KEY
FUNCTION
ESC
Returns to the previous screen.
>
Selects the available parameters.
OK
Enters in the selected parameter.