E Instruments E500 - 9 Menu

23
>
9.0 MENU
9.1 Menu
SUB-MENU
FUNCTION
Measurements
Through this menu, it is possible to execute the draft, ambient CO and pressure
Measurements.
SEE CHAPTER 9.2.
Configuration
The user can set the different reference parameters of the instrument in order to
perform the combustion analysis.
SEE CHAPTER 9.3.
Diagnostic
The user can verify any anomalies of the instrument.
SEE CHAPTER 9.4.
Info service
Display the info about the current condition of the instrument.
SEE CHAPTER 9.5.
15/06/18 10:00
MENU
►Measurements
Configuration
Diagnostic
Info service
KEY FUNCTION
ESC
Returns to the previous screen.
>
Selects the available parameters.
OK
Enters in the selected parameter setting.