E Instruments E500 - Menu→Diagnostic

53
>
9.5 Menu→Diagnostic
SUB MENU
DESCRIPTION
Sensors
Displays information on the state and calibration of the electrochemical sensors.
Moreover, accesses to the ID data of the sensor:
Code
Serial number
Manufacturing and calibration date.
Measured currents (to perform a quick diagnosis in case of malfunction).
SEE CHAPTER 9.5.1.
Gas probe
Tests the tightness of the gas probe pneumatic path.
SEE CHAPTER 9.5.2.
Hardware
If a malfunction happens, before contacting the Customer care service collect and/or send
the data present in this menu.
SEE CHAPTER 9.5.3.
15/06/18 10:00
DIAGNOSTIC
►Sensors
Gas probe
Hardware
KEY FUNCTION
ESC
Returns to the previous screen.
>
Selects the available parameters.
OK
Enters in the selected parameter.