1.0 IMPORTANT INFORMATION 06
1.1 Information about this manual 06
1.2 Danger levels and other symbols 06
2.0 SAFETY 07
2.2 Safety check 07
2.2 Intended purpose 07
2.3 Improper use of the product 07
2.4 Precautions for the usage of the Li-Ion battery package 07
3.0 WORKING PRINCIPLE 08
3.1 General overview of the analyzer 08
4.0 DESCRIPTION OF THE PRODUCT 09
4.1 Working principle 09
4.2 Measurement cells 09
4.3 Fuel types 09
4.4 Sample treatment 09
4.5 Pressure sensor, piezoelectric, temperature compensated 09
4.6 Suction pump 09
4.7 Draft measurement with sensor automatic autozero 09
4.8 Bluetooth® connection 10
4.9 IR connection 10
4.10 Available software and applications 10
5.0 COMPONENTS DESCRIPTION 11
5.1 Instrument interface 11
6.0 TECHNICAL SPECIFICATIONS 13
6.1 Technical specifications 13
6.2 Measurement and Accuracy Ranges 14
7.0 USING THE FLUE GAS ANALYZER 15
7.1 Preliminary operations 15
7.2 Warning 15
7.3 Analyzer Power supply 15
7.3.1 Internal battery charge level 15
7.3.2 Use with external power pack 16
7.4 QR code generation 16
7.5 Connection diagram 17
8.0 FLUE GAS ANALYSIS 18
8.1 Flue gas Analysis 18
8.1.1 Switching on the instrument and out-calibration 18
8.1.2 Preliminary Operations 19
8.1.3 Inserting the probe inside the stack 19
8.1.4 Performing the combustion analysis 20
8.1.5 End of the Analysis 21
To Next Page
Loading...
