E Instruments E500 - Menu→Configuration→Analysis→Measure Units

33
9.4.1.4 Menu→Configuration→Analysis→Measure units
15/06/18 10:00
MEASURE UNITS
►CO ppm
Pressure hPa
Draft mmH2O
Temperature oC
Altitude ft
Example:
Measurement unit can be set as: ppm - mg/m
3
- mg/kWh - g/GJ - g/m
3
ng/J - g/kWh - %
Measurement unit can be set as: ppm - mg/m
3
- mg/kWh - g/GJ - g/m
3
ng/J - g/kWh - %
Measurement unit can be set as: hPa - Pa - mbar - mmH
2O - mmHg - inH2O - psi
Measurement unit can be set as: °C - °F
Measurement unit can be set as: m - ft
OK
OK
>
>
>
KEY FUNCTION
ESC
When pressed in modify mode cancels the selection made, otherwise re-
turns to the previous screen.
>
The arrows select each line displayed. In edit mode, it scrolls through the
suggested values.
OK
Enters the modify mode for the selected parameter, then confirms the
modification.
15/06/18 10:00
MEASURE UNITS
►CO ppm
Pressure hPa
Draft mmH2O
Temperature oC
Altitude ft
15/06/18 10:00
MEASURE UNITS
►CO
ppm
Pressure hPa
Draft mmH2O
Temperature oC
Altitude ft
15/06/18 10:00
MEASURE UNITS
►CO
mg/m3
Pressure hPa
Draft mmH2O
Temperature oC
Altitude ft