E Instruments E500 - Menu→Diagnostic→Hardware

56
>
9.5.3 Menu→Diagnostic→Hardware
INTERACTIVE OPERATIONS
DESCRIPTION
mV
Shows the values in mV.
Bit
Shows the values in Bit.
Note: the memory and calibration parameters are not accessible if their condition is OK.
Visualization example:
OK
OK
>
15/06/18 10:00
HARDWARE
Memory OK
Calibration OK
►Voltages
ADC channels
KEY FUNCTION
ESC
Returns to the previous screen.
>
Selects the available parameters.
OK
Enters in the selected parameter.
11/12/17 10:00
HARDWARE
Memories OK
Calibration OK
►Voltages
ADC channels
11/12/17 10:00
VOLTAGES
VBAT 3001 m
VIN 4712 m
VRTC 2602 m
11/12/17 10:00
HARDWARE
Memories OK
Calibration OK
Voltages
►ADC channels
11/12/17
10:00
ADC CH. [1/2]
O2-GAS 1016 m
CO-SEN 58 m
CO-AUX 58 m
NO 60 m
PRESS 225 m
EM-SEL 1499 m
Bit
11/12/17 10:00
ADC CH. [2/2]
T-FLUE 1499 m
T-SPAN 58 m
T-ZERO 60 m
T-GND 225 m
TCOLDJ 1499 m
Bit