E-TON EV3 E-MO - Removing the Handlebar Grip; Installing the Handlebar

ϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰϰ
ϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧϧ
2
T
R
.
.
45 Nm( 4.5 m•kg, 32.5 ft•lb)
3
2
3
7-15
STEERING SYSTEM
CHAS
REMOVING THE HANDLEBAR GRIP
1. Remove
• Handlebar grip
• Blow compressed air between the handlebar
and handlebar grip, and gradually push the
grip off the handlebar.
Removing step :
1. Check
• Handlebar
%HQGVGDPDJHĺUHSODFH
CHECKING THE HANDLEBAR
Do not attempt to straighten a bent handlebar
as this may dangerously weaken the handlebar.
WARNING
INSTALLING THE HANDLEBAR
1. Handlebar
Tighten the bolt.
2. Install
• Handlebar grip
Refer to "MAINTAINENCE FRONT BRAKE" in
cheaper 3.
TIP
Before installing the handlebar grip,should be
put oil on the left headlebar grip.