54
Sonar Menu (left) with Sonar Features selected. In the Sonar
Features menu (center) the SeaFinder's Noise Rejection feature is se-
lected with ASP in the default low setting. The Noise Rejection feature
(far right) is set the same in the FishMark unit.
To change the ASP level:
1. From the Sonar Page press
MENU|↓ to SONAR FEATURES|ENT.
2. Press ↓ to
NOISE REJECTION|ENT.
3. Press ↓ or ↑ to select a setting then press
ENT.
4. To return to the previous page press
EXIT|EXIT.
Alarms
This unit has three different types of sonar alarms. The first is the Fish
Alarm. It sounds when the Fish I.D. feature determines that an echo
is a fish.
Another alarm is the Zone Alarm, which consists of a bar on the side of
the screen. Any echo on the chart that appears inside this bar triggers
this alarm.
The last alarm is the Depth Alarm, which has both a Shallow and a
Deep setting. This is useful as an anchor watch, a shallow water alert
or for navigation.
To Next Page
Loading...
