70 Eaton 93E UPS (20–30 kVA, 208/220V) Installation and Operation Manual 164000301—Rev 04
Table 17. Display Function Menu Map
Menu Option Description
METERS Displays performance meters for the system or critical load.
EVENTS Displays the list of Active System Events.
HISTORY Displays a historical log of system events.
CONTROLS Displays the System Control screen.
SETUP Allows you to set the date and time for the time stamp, set the display language, the unit name, and meter
subscripts, change the password, and view the firmware version numbers.
ESC Returns to Main Menu and Mimic screen from the Meters, Events, History, Controls, or Setup screens. Returns
to the main System Setup Level screen from a setup submenu.
UPS OPERATING INSTRUCTIONS
EATON 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 4P Draft 31-Jan-2010
7-6
7.2.4 Using the Menu
The UPS menu bar allows you to d isplay data in the information area to help you
monitor and control UPS operation. Table 7-2 shows the basic menu structure.
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to s et the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
7.2.5 Mimic Screen
Figure 7-5 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
ESC pushbutton on the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time
graphical representation of the operating s tatus of the system.
TIME: 11 : 35 : 43 DATE: 02 / 25 / 2004
CONTROLS LOAD OFF
METERSEVENTS SETUP
OUTPUT
BATT
UPS
INPUT
STS
W
BYP ASS
Figure 7-5. Main Menu and Mimic Screen (Normal Mode)
Return arrow acknowledges or executes a command, or saves a setting.
UPS OPERATING INSTRUCTIONS
EATON 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 4P Draft 31-Jan-2010
7-6
7.2.4 Using the Menu
The UPS menu bar allows you to d isplay data in the information area to help you
monitor and control UPS operation. Table 7-2 shows the basic menu structure.
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to s et the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
7.2.5 Mimic Screen
Figure 7-5 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
ESC pushbutton on the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time
graphical representation of the operating s tatus of the system.
TIME: 11 : 35 : 43 DATE: 02 / 25 / 2004
CONTROLS LOAD OFF
METERSEVENTS SETUP
OUTPUT
BATT
UPS
INPUT
STS
W
BYP ASS
Figure 7-5. Main Menu and Mimic Screen (Normal Mode)
Up and down arrows scroll through screens and lists or highlight settings.
UPS OPERATING INSTRUCTIONS
EATON 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 4P Draft 31-Jan-2010
7-6
7.2.4 Using the Menu
The UPS menu bar allows you to d isplay data in the information area to help you
monitor and control UPS operation. Table 7-2 shows the basic menu structure.
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to s et the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
7.2.5 Mimic Screen
Figure 7-5 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
ESC pushbutton on the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time
graphical representation of the operating s tatus of the system.
TIME: 11 : 35 : 43 DATE: 02 / 25 / 2004
CONTROLS LOAD OFF
METERSEVENTS SETUP
OUTPUT
BATT
UPS
INPUT
STS
W
BYP ASS
Figure 7-5. Main Menu and Mimic Screen (Normal Mode)
Left and right arrows select or adjust settings displayed on the screen.
77..22..55 MMiimmiicc SSccrreeeenn
Figure 42 shows the Main Menu and Mimic screen. To select the Mimic screen from the Meters, Events,
History, Controls, or Setup screens, press the ESC pushbutton on the current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time graphical representation
of the operating status of the system.
Figure 42. Main Menu and Mimic Screen
UPS Operating Instructions
To Next Page
Loading...
