72 Eaton 93E UPS (20–30 kVA, 208/220V) Installation and Operation Manual 164000301—Rev 04
Table 18. Display Menu Operation (Continued)
Function Subfunction
Operation
bar. Use the UP or DOWN arrow pushbutton. to select About. To return to the
System Setup screen, press the ESC pushbutton.
Setup – Config
(System Level 1
Setup)
Password To enter a password if required, use the LEFT or RIGHT arrow pushbutton to
select the password character position. Use the UP or DOWN arrow pushbutton
to change the password character. Once the password is entered, select DONE
and then press the RETURN pushbutton. The System Setup Level 1menu screen
is displayed. The default System Setup Level 1 password is 0101.
Function Selection This screen can be used to set the date and time, change the display language,
enter a unit name, change the meter style, perform lamp test, clear the history
log, and enter a password to access Level 1 functions. Use the LEFT or RIGHT
arrow pushbuttons to select the SETUP symbol on the main menu bar to display
the Setup screen. Use the LEFT or RIGHT arrow pushbutton to select CONFIG
on the Setup menu bar. Enter a password if required.
Clock The Clock Setup screen allows the selection of either month/day/year or day/
month/year formats and daylight savings time for display on the screen and for
logging events in the Event and History Logs. Use the UP or DOWN arrow
pushbutton to select CLOCK to display the Clock screen. Use the UP or DOWN
arrow pushbutton to highlight the desired format, then press the RETURN
pushbutton to display the Set Date and Time screen. To return to the System
Setup screen, press the ESC pushbutton.
Setup – Config
(System Level 1
Setup) (continued)
Set Date and Time
MM/DD/YYYY
The Set Date and Time MM/DD/YYYY screen allows the internal date and time
of the UPS to be set in the month/day/year format. The date and time
information is used for display on the screen and for logging events in the Event
and History Logs. Use the LEFT or RIGHT arrow pushbutton to highlight the
setting to be changed. Use the UP or DOWN arrow pushbutton to make the
change. When finished making changes, use the LEFT or RIGHT arrow
pushbutton to highlight SAVE and the UP or DOWN arrow pushbutton to select
YES. To complete the save function and return to the System Setup screen,
select the RETURN arrow pushbutton.
Set Date and Time
DD/MM/YYYY
The Set Date and Time DD/MM/YYYY screen allows the internal date and time
of the UPS to be set in the day/month/year format. The date and time
information is used for display on the screen and for logging events in the Event
and History Logs. Use the LEFT or RIGHT arrow pushbutton to highlight the
setting to be changed. Use the UP or DOWN arrow pushbutton to make the
change. When finished making changes, use the LEFT or RIGHT arrow
pushbutton to highlight SAVE and the UP or DOWN arrow pushbutton to select
YES. To complete the save function and return to the System Setup screen,
select the RETURN arrow pushbutton.
Language
The Language Setup screen allows the display menu language to be selected.
Use the UP or DOWN arrow pushbutton to highlight Language, then press the
RETURN pushbutton to display the Language screen. Use the UP or DOWN
arrow pushbutton to highlight the desired language, then press the RETURN
pushbutton. To return to the System Setup screen, press the ESC pushbutton.
Unit Name The Unit Name Setup screen allows a unit name to be entered. Use the UP or
DOWN arrow pushbutton to highlight Unit Name, then press the RETURN
pushbutton to display the Unit Name screen. Use the LEFT or RIGHT arrow
pushbutton to highlight the character to be changed. Use the UP or DOWN
arrow pushbutton to make the change. When finished making changes, use the
UPS Operating Instructions
To Next Page
Loading...
