• Gigabit Network Card (NETWORK-M2)
Enhances the capabilities and protection provided by the UPS by enabling
Web and SNMP based remote monitoring and e-mail alarms. The card also
enables shutdown of servers and migration of virtual machines through IPM
and IPP software. Supports 10/100 Mbit and Gigabit Ethernet.
Figure 28: Network-M2 card
• Industrial Gateway Card (INDGW-M2)
This card has all the features and capabilities of the Gigabit Network Card. In
addition, it also provides direct integration of system level UPS information
(meters and status) to a Building Management System (BMS) using the
Modbus RTU and Modbus/TCP.
Figure 29: Industrial Gateway Card
• PX Gateway Card
© Eaton Corporation plc 2020. All rights reserved. Revision: 001 Document ID: P-164000956 81 (141)
Eaton 93PM G2 UPS 50 – 360 kVA User’s and Installation Guide
To Next Page
Loading...
