4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 09 15
Figure 12. Remove Cabinet from Castor Tray
Slot Tabs
Rear Bracket
Note: Attach appropriate
lifting device and use at
least two people to lift the
UPS cabinet
Caster Tray
UPS Cabinet
4. Carefully slide the UPS from the caster tray onto the rail tray in the equipment rack until the rack-mount
ears of the cabinet are almost flush with the front vertical rails of the rack. Install metal clip nuts in the rack
in line with the upper mounting brackets. Install the provided screws (see Figure 13 ).
5. Install the provided screws into the lower rack mount ears to the threaded holes in the rail tray (see
Figure 13 ).
Rack-Mount Installation
To Next Page
Loading...
