Eaton 9PXM - Figure 48. EBM to UPS Connections

4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 09 55
Figure 48. EBM to UPS Connections
EBM Terminal
Blocks
UPS/EBM
Terminal
Block
From previous
EBM
(if installed)
To upstream
EBM CN4
(if installed)
CN3CN4 CN4
EBM UPS
To AC
supply for
super
charger
(if installed)
DC+
DC-
DC+
DC-
To UPS Signal Input Port CN4
L1
G
N
L2
7. On the upper rear panels, connect the input signal cables from the EBM CN4 to the UPS input signal port
CN4 using the supplied cables. (See Figure 43).
8. If additional battery cabinets are to be connected to the first, in a daisy-chain configuration, connect each
EBM with signal cables from CN3 to CN4 (see Figure 49 ).
Connected Battery Cabinet Option