40 4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 09
Figure 33. UPS Power Terminals
AC Input Terminals
Terminal Cover
Terminal Cover
AC Output Terminals
2. At the AC Input terminal, make sure to wire the UPS for the proper input voltage as shown in Figure 34 .
Split-phase power modules provide a 2-phase output which can be configured as output voltages: 110/110
for 220, 120/120 for 240, 120/120 for 208, or 127/127 for 220 Vac, as selected through the front panel
display (“7.15 Display Menu Screens ”).
UPS Electrical Installation
To Next Page
Loading...
