Eaton CF2000 - Page 12

12 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
The range of compatible detectors for the CF2000 system consists of the following:
Model Optical Sensor Heat Sensor Opto-Heat
Sensor
Operating voltage 18 to 30V dc
Standby current (max) 220μA
Alarm current (max) 5mA
Ambient Temperature (max)
60ºC
A1R 50ºC
50ºCBS 65ºC
CS 80ºC
Ambient Temperature (min) -20ºC
Alarm temperature (static)
N/A
A1R 60ºC
60ºCBS 77ºC
CS 90ºC
Heat sensor class as defined by
EN54-5:2000
N/A A1R, BS, CS
control panel
selectable
A2S
Relative humidity (no n co nd) 0 to 95%
Height (w/o base) 34mm 43mm
Height (with base) 47mm 56mm
Diameter 100mm
Weight (w/o base) 86g 78g 76g
Material PC/ABS
Colour White
Optical Sensor
This is the most commonly used detector
and is most suitable for detecting slow
burning fires.
The status LED can be programmed to
either be permanently off under normal
conditions or to pulse in order to confirm
that it is in communication with the
control panel.