Eaton CF2000 - LCD Display & System Status

40 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Panel Controls and Indicators
LCD Display Overview
Name Function
❶
Time Displays the current time
❷
Date Displays the current date
❸
System Health Displays the current system health
❹
Active Zones Displays the number of zones and if they are active
❺
Alarm Counter The alarm counter ‘AC==xxx’ represents the total number of
instances the CIE has entered the alarm state. It increments on
the state change & not the number of alarm events
❻
fault relay
disablement state
FLT/RL:E = Fault Relay Enabled
FLT/RL:D = Fault Relay Disabled
❼
— PN, LP AD, ZN = Panel, Loop, Address & Zone. (Not pictured)
Appears on an event screen
System Healthy
The panel is operated via an 8 button keypad. The default healthy screen is shown
below. From this screen all the panels functions can be operated. Press any key to
prompt the passcode screen.
Figure 8. Default System Healthy screen
System Healthy
1 of 2 Zone(s) Active
AC=XXX
12:05:00 23-April-19
FLT/RL:E
❶
❷
❸
❹
❺ ❻