57INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Panel Controls and Indicators
Access Level 2
Commissioning
The Commissioning screen is accessed as shown below. The commissioning screens
are accessed from the healthy screen by first pressing any button. You will then be
prompted to enter the passcode which will show the screen below by default.
Press OK and scroll through the list of events using the Up and Down arrow buttons.
First time power up will autolearn when button 4 is held when powered. Panel will
continue to reset if no devices found on Autolearn.
Figure 24. Commissioning screen
To Next Page
Loading...
