Eaton CF2000 - Introduction to the Manual; Manual Overview

5INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Contents
IP66 Wall Sounder Wiring .........................................88
3 Way Input/Output unit ..........................................89
1 Channel Mains Rated I/O Wiring ..................................90
Zone Monitor Unit Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Intrinsically Safe Zone Monitor Unit Wiring ...........................92
Shop Monitor Unit ..............................................93
Spur Isolator ...................................................94
4 Way Sounder Controller ........................................95
Micro Zone Monitor Wiring .......................................96
Micro Input Module Wiring .......................................97
Battery Disposal Instructions ......................................97
NOTES .....................................................99
DOCUMENT UPDATE NOTES
S.No. Release / Change Notes Date
A First Release March 2019
B First Revision December 2019
Introduction to the Manual
This manual provides information on the installation, operation and maintenance of
the Eaton Fire Systems CF2000 Control Panel.
Notice
The operating system of the panel may be revised as a result of enhancements to
the system software or hardware. An updated issue of this manual is available on
request. The current issue of the manual can also be downloaded from the
Eaton website.
WARNING
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE
OF THE USED BATTERIES ACCORDING TO THE INSTRUCTIONS IN THE BATTERY
DISPOSAL INSTRUCTIONS.