15INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Base Sounder
The base sounder has been designed specifically to complement the latest
generation of Eaton soft addressed detectors.
It consists of a first fix bracket, and a main body which clips onto the bracket
incorporating the sounder and a detector mounting base in a single composite
assembly.
After the body has been clicked into place and connected, a sensor or front cover is
then added to complete a very simple quick and neat installation.
The cover enables the base sounder to be used as a discreet stand alone wall or
ceiling mounted device.
The sounder base design incorporates a mechanism that can be activated if required
to lock either the sensor or the cover into place to prevent unauthorised removal.
Base Sounder Beacon
The base sounder beacon has been designed
with the same fixing as the sounder base so
it can accommodate either a detector or front
cover being fitted.
To Next Page
Loading...
