20 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Micro Interfaces
A range of micro interfaces modules are also available:
The micro zone monitor is fully
compatible with the current range of
Eaton analogue fire detection panels.
It is suitable for interfacing a zone of up
to 20 conventional detectors connected
via the EFXN520 range of detector
bases and compatible detectors, onto
an Eaton analogue fire panel. It will
operate with any Eaton conventional
detector in configuration with a schottky
diode type base.
The micro input module accepts input
signals from external equipment such
as beam detectors, flow switches, valve
monitor switches etc. The control panel
can be programmed to perform different actions based on the state of the input.
The maximum number of input devices per loop is 200.
To Next Page
Loading...
