Eaton CF3000 - Panel Controls & Indicators; Password Protection

108 CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Panel controls & indicators
Network
Enter the Service Mode and Select Configure. Select “Network”, This menu defines
whether messages are broadcast across the network or remain local.
Password protection
The Eaton Fire Systems control panel system has password protection which
restricts access to the DISABLE Menu and to TEST/COMMISSIONING MODE. The
password is a four digit code and the default number is 2214. The password entry
screen is accessed via the supervisor mode button. Press supervisor mode and the
password entry screen will be displayed, type in the passcode and press Ok. If the
wrong password is entered three times further access to the system is denied
Service
FRE off
Reset
Exit
Change Date/Time
Change Text
Change Passcode
Italian Mode
M
ute
Buzzer
Programming I/O
and Sounders
Configure Zones
Add/Delete
Configure Heat Detectors
Network
Language
Day/Night
Network Protocol
Please enter Passcode
1
4
5
6
7
8
9
ok
0
2
3
Service
FRE Off
Cancel
Service
FRE Off
Exit
Network
Network
Network
Reset
Receive message over network
Evacuate
Fault
Pre-Alarm
Network
Network
Network
Silence
Fire