Eaton CF3000 - Auto Learn Procedure

87CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Panel controls & indicators
Auto learn
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Commission.
Service
FRE off
Commission
Test
Configure
Do you want to continue?
No
Pre-addressed auto-learn
Maintenance auto-learn
Yes - autolearn all loops
E
xit
Mute
Buzzer
Reset
Exit
Service
FRE Off
Auto Learn
Yes - autolearn loop 1 only
Yes - autolearn loop 2 only
Yes - autolearn loop 3 only
Yes - autolearn loop 4 only
Select “Auto Run” from
the congure menu
screen.
IMPORTANT:
Activating autolearn will
erase all existing
programming, text and
conguration data.
Exit
Reset
Service
FRE Off
Load logo from PC
Auto Learn
Erase Log
A
nalogue Level
Printer Settings
Change Panel Number
Number of Panels
in Network
Commission devices to
hybrids (26V mode)
Download CDR to Laptop
Load CDR from Laptop
Mute
Buzzer
Screen Cover
System Details