2 CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Contents
Contents
INTRODUCTION ..............................................11
Project planning ................................................11
SYSTEM DESIGN GUIDELINES .................................12
Guidelines ....................................................12
Loop lengths
..................................................12
Loop loading - total number of addresses
............................12
Repeater Panels
...............................................12
Loop Loading System Verification
..................................13
COMPATIBLE EQUIPMENT .....................................13
Compatible callpoints ...........................................19
Compatible sounders and beacons
.................................19
Base sounder
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Base sounder beacon
...........................................20
Visual Alarm Devices (VADs)
......................................21
Loop powered beacon
...........................................21
Dedicated stand alone sounders
...................................22
Interfaces
.....................................................23
3 channel I/O devices
...........................................23
1 channel I/O device with mains rated switching
......................24
Zone monitor units
.............................................25
4 way sounder circuit controller
...................................27
4-20mA interfaces
..............................................27
Micro interfaces
................................................28
Technical input/output unit
........................................29
Fan controller interfaces
.........................................30
EQUIPMENT COMPATIBILITY ...................................31
Sensors ......................................................31
Call points
....................................................31
Sounders
.....................................................31
Relay circuits
..................................................31
Relays/auto-dialers and auxiliary equipment
..........................32
Additional instructions for electromagnetic compatibility
................32