38 CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Technical specification
Auxiliary relays
The auxiliary relays provide fused volt free change over contacts. These contacts are not monitored.
Max Load 24 Volts 1 Amp
Fuse (PTC4) 1.35 Amps polyswitch
Auxiliary 24V supply
Nominal Voltage 24 Volts ±10%
Fuse (PTC5) 100 mA Polyswitch
Maximum current 30 mA
This output is not to be used for Fire protecting equipment or Fire alarm routing Equipment Any power taken from
the alarm system will effect the standby duration.
Terminal blocks: Do not use excessive force when tightening the screws on the
terminal block
Printer (Optional)
Type High speed thermal
Number of characters per Line 40
Type of paper 58mm x 46mm Thermal Roll
Replacement paper roll order code ADF6PRINTERPAPER
To Next Page
Loading...
