Eaton CF3000 - Pre-Alarms; Faults

73CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Panel controls & indicators
Evacuate
Silence
Alarms
Reset
Supervisor
FRE Off
Others
Pre-alarm = Some smoke /heat but below fire threshold
These warnings will appear and disappear
Mute
Buzzer
View Fires
AC = 0
View Pre
Alarms
View
Disabled
View
Faults
Evacuate
Silence
Alarms
Reset
Supervisor
FRE Off
Pre-alarm = Some smoke /heat but below fire threshold
These warnings will appear and disappear
Mute
Buzzer
Others
Fires
AC = 0
Pre
Alarms
Disabled
Faults
Pre-alarms
Enter the Supervisor Mode and Select “Pre-Alarms” tab.
A pre-alarm is shown when a detector appears to register heat or smoke but in a
quantity that is insufficient to warrant an alarm.
Pre-alarm may indicate a build up of dirt in a smoke detector which can be
interpreted by the detector as smoke presence.
Faults
Enter Supervisor Mode Passcode and select “Faults” tab.