Eaton CF3000 - Global Flashing LED On;Off

83CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Panel controls & indicators
Global flashing LED On/Off
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Test.
Service
FRE Off
Configure
Commission
Test
Global flashing LED’s
Flashing
Off
Service
FRE Off
Global Flashing LED On/Off
E
xit
Exit
Mute
Buzzer
Mute
Buzzer
Reset
Reset
One Man Walk Test
Test Device
Test Zone
Sound Level Test Mode
If global LED ashing is set to on,
all device LED’s will pulse intermittenly
to conrm correct communication.
Select “Global ashing LED on/off
from the test menu screen.”