58 CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Panel assembly information
Fitting printer paper roll
Open the printer access door on the right hand side of the panel using the key
provided. Drop the paper roll into the paper holder and feed paper into the printer.
The printer will then automatically pull the paper through if the panel is powered up.
Tear off the excess paper them close and secure the printer access door.
Please note for paper feed to operate correctly, paper end must be straight.
New paper roll simply drops into the holder.
Push paper underneath the roller as shown
until printer automatically loads the paper.
Tear off excess paper and close the printer
compartment door.
To Next Page
Loading...
