Eaton Fuller AT-1202 - Specifications; Shift Positions and Specifications

Specifications
3
General Information
Shift Positions and Specifications
Specifications
Gear Ratios
Mountings
Front bearing cover machined for trunnion mounting.
Four 5/8" diameter mounting studs, two on each side of case.
Gear Ratios
Direct 1.00
Reduction 2.036
Power Take-OFF
Bottom SAE Standard 6-bolt, 30 tooth, 5P gear on left coun-
tershaft turning at .993 input shaft speed.
Top SAE Standard 8-bolt, 30 tooth, 5P gear on right coun-
tershaft turning at .993 input shaft speed.
Weight 330 pounds
Oil Capacity 12 pints
Installation length 16-3/16 inches
Shift Positions
Nuetral
Direct
Reduction