INSTALLATION
EATON Powerware
®
5125 (9910-E65) UPS Installation Guide for IBM
®
Applications S 164201698 Rev 1
9
7. Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
8. Align the mounting brackets with the screw holes on the side of the
UPS and secure with the supplied #6-32
×3/8” flat-head screws
(see Figure 6).
9. If installing an optional EBM, repeat Steps 7 and 8 f or each cabinet.
Mounting Bracket
Figure 6. Installing the Mounting Brackets
To Next Page
Loading...
