Eaton Powerware 5125 - 1 Installation; Parts List

EATON Powerware
®
5125 (9910-E65) UPS Installation Guide for IBM
®
Applications S 164201698 Rev 1
1
Chapter 1 Installation
Parts List
IBM part numbers are subject to change without notice.
Table 1. E65 Base Configuration (42R8077)
Quantity IBM MN IBM FC IBM PN Eaton
®
PN Description
1 E65 — 42R8077
103003611-3992 E65 UPS 5000 VA, 4500W (in shipping carton or
factory-installed in rack)*
103006304 Accessory Kit*:
S (1) Left Rail Assembly (103006314)
S (1) Right Rail Assembly (103006315)
S (2) Mounting Brackets (157606083-003)
S (4) Mounting Bracket Screws (#6-32
×3/8”)
(180500167-203)
1 — — 42R8078 103004715-3992 E65 Accessory Kit
2 — — 39J4828 103004696-3991 Battery Trays
* If the UPS is factory-installed in an IBM rack, these items are pre-assembled.
Table 2. E65 Application Matrix
IBM MN IBM FC IBM PN Eaton PN Description
Quantity for
p5/pSeries
®
Rack Worldwide
Quantity for
i5/iSeries
t
Rack Worldwide
— 2939
1
42R4332 103004741-5591 Relay-Serial Card and Cable
Kit (DB-9, 1.8m/6 ft;
(DB-25, 9.1m/30 ft)
— 1
— 2972
2
25R2555 IBM-Supplied IBM PDU to UPS Power Cord
(4.3m/14 ft)
1
E
6
5
U
P
S
— 2973
2
42R4331 103004733-3991 IBM PDU to UPS Power Cord
(1.2m/4 ft)
1 per E65 UPS
Varies
3
Varies Varies IBM-Supplied UPS Input Power Cord 1 per E65 UPS
1
Maximum: One FC 2934 or 2939 per E65 UPS.
2
Maximum: One FC 2972 or 2973 per E65 UPS.
3
See “Typical Power Connections” on page 21.