INSTALLATION
EATON Powerware
®
5125 (9910-E65) UPS Installation Guide for IBM
®
Applications S 164201698 Rev 1
3
Table 5. E65 6645 EBM Components (42R8075)
Quantity IBM MN IBM FC IBM PN Eaton PN Description
1 — 6645 42R8075
103003387-3992 E65 6645 EBM 3U High (in shipping carton or
factory-installed in rack)*
103006308 Accessory Kit*:
S (1) EBM Front Cover (157604790-002)
S (1) Left Rail Assembly (103006173)
S (1) Right Rail Assembly (103006172)
1 — — 42R8076 103003947-3992 EBM Accessory Kit
* If the EBM is factory-installed in an IBM rack, these items are pre-assembled.
Table 6. EBM Accessory Kit (42R8076)
Quantity Eaton PN Description
1 164201518 Powerware 240V Extended Battery Module (EBM 240) User’s Guide
1 103002843-3992 Rail Hardware Kit (metric):
S (8) M5
×12 Pan-Head Screws
S (8) M5
×10 Flat-Head Screws
S (4) M5
×16 Hex-Head Screws
S (4) M5 Clip Nuts
S (2) Square-Hole Adapter Plates
2 157605902-003 Joining Brackets
4 180500153-306 Joining Bracket Screws (M4×10 mm)
Setup and Installation
The E65 UPS can be purchased separately or factory-installed in an IBM
iSeries or pSeries rack.
NOTE If the UPS is pre-installed in an IBM rack, continue to “Installing the Internal
Batteries” on page 13. If you are installing the UPS in an IBM iSeries (0550, 0551, 0553, 0554
or 0555 type) or pSeries (7014 type) rack, continue to the following section, “Tools Required.”
To Next Page
Loading...
