Eaton Powerware 5125 - Page 8

INSTALLATION
EATON Powerware
®
5125 (9910-E65) UPS Installation Guide for IBM
®
Applications S 164201698 Rev 1
2
Table 3. E65 Options Matrix
IBM MN IBM FC IBM PN Eaton PN Description
Quantity for
p5/pSeries Rack
Worldwide
Quantity for
i5/iSeries Rack
Worldwide
— 2934
1
39J4824 116750221-001
-X Web/SNMP
Card
2
Kit
ConnectUPS
t
Min: 0, Max: 1 —
— 6645 42R8075 103003387-3992 Extended Battery Module
(EBM)
Min: 0, Max: 4
— — 42R8076 103003947-3992 EBM Accessory Kit 1 per FC 6645
1
Maximum: One FC 2934 or 2939 per E65 UPS.
2
ConnectUPS-X Web/SNMP Card required if implementing Logical Partitions (LPARs) on p5 or pSeries.
Table 4. E65 Accessory Kit (42R8078)
Quantity Eaton PN Description
1 164201541 Powerware 5125 Rack-Mount UPS (5000/6000 VA) U ser’s Guide
1 164201698 Powerware 5125 (9910-E65) Installation Guide for IBM Applications
4 152601942-001 IEC 320-C13 to C14, 10A Equipment Power Cords (2m/6.6 ft)
1 152601971-001 IEC 320-C19 to C20, 16A Equipment Power Cord (4.5m/14.8 ft)
1 103004870 Software Suite CD
1 157809009-002 UPS Front Cover
1 116750226-001 UPS to Server Communication Cable (RJ-45 to DB-9, 1.8m/6 ft)
1 124102042-002 UPS to Server Communication Cable (DB-9 to DB-9, 3.6m/12 ft)
1 103002843-3992 Rail Hardware Kit (metric):
S (8) M5
×12 Pan-Head Screws
S (8) M5
×10 Flat-Head Screws
S (4) M5
×16 Hex-Head Screws
S (4) M5 Clip Nuts
S (2) Square-Hole Adapter Plates
1 154105635-001 Connector Plug, 10A, 2-Pin