Eaton Powerware 5125 - Initiating the Self-Test; Operating Modes

OPERATION
EATON Powerware
®
5125 (9910-E65) UPS Installation Guide for IBM
®
Applications S 164201698 Rev 1
28
Initiating the Self-Test
Press and hold the button for three seconds to initiate the self-test.
If the alarm beeps or a UPS alarm indicator stays on, refer to
“Troubleshooting” in the Powerware 5125 Rack-Mount UPS
(5000/6000 VA) User’s Guide.
Operating M odes
The Powerware 5125’s front panel indicates the UPS status through the
UPS indicators. Figure 22 shows the UPS front panel indicators and
controls.
On Button
Off Button
Alarm Reset Button
Normal Mode Indicator (Solid Green)
Standby Mode Indicator (Flashing Green)
Bypass Mode Indicator (Solid Red)
Red
Flashing
Unlit
Green
Indicator Legend
Load Level IndicatorsBattery Mode Indicator
Figure 22. UPS Front Panel