COMMUNICATION OPTIONS
EATON Powerware
®
5125 (9910-E65) UPS Installation Guide for IBM
®
Applications S 164201698 Rev 1
36
Follow the instructions included with the Relay-Serial Card and Cable Kit
to install the card and set UPS monitoring functions in i5/OS and serial
(TTY) server. Installation may include removal of an existing X-Slot card
from the UPS.
Follow the software installation instructions contained on the Software
Suite CD to install the Powerware LanSafe software.
If you have an i5, connect the cables as shown in Figure 25. Otherwise,
see Figure 26 to connect the cables.
AS/400 Interface Cable
(labeled 152601976-001)
UPS Interface Cable (labeled 1827)
“P1-T1” UPS Port
IBM i5 Server
Serial Interface Cable
(labeled 124102044-001)
UPS
Communication Port
Serial (TTY)
Server
Relay-Serial Card
Figure 25. i5 and Serial Server Interface
To Next Page
Loading...
