CONFIGURATION
EATON Powerware
®
9125 Two-in-One UPS (700–2000 VA) User’s Guide S 164201514 Rev B www.powerware.com
38
4. Press and hold the On button and the button simultaneously
for three seconds to exit Configuration mode at any time.
1
Press and hold the On and Test/Alarm Reset
buttons simultaneously for three seconds to
toggle between Configuration and Operation
modes.
&
4
Press the Test/Alarm Reset
buttonONCEtoselectan
option.
3
Press the On button to
scroll to the next option.
2
On Button
Test/Alarm
Reset Button
Configuration Mode LEDs
Figure 21. Using Configuration Mode
To Next Page
Loading...
