Eaton Powerware 9125 - Page 45

CONFIGURATION
EATON Powerware
®
9125 Two-in-One UPS (700–2000 VA) User’s Guide S 164201514 Rev B www.powerware.com
39
Table 1. Configuration Mode LEDs and Options
Configuration Mode
LEDs
Option LED Status Explanation
120/230V
Nominal Input
Voltage
On (default) Nominal input voltage is 120V for low voltage models and
230V for high voltage models.
All other nominal input voltages are disabled.
Flashing 120/230V is disabled; one of the other input voltage options is
selected.
110/220V
Nominal Input
Voltage
On Nominal input voltage is 110V for low voltage models 220V
for high voltage models.
All other nominal input voltages are disabled.
Flashing
(default)
110/220V is disabled; one of the other input voltage options is
selected.
127/240V
Nominal Input
Voltage
On Nominal input voltage is 127V for low voltage models and
240V for high voltage models.
All other nominal input voltages are disabled.
Flashing
(default)
127/240V is disabled; one of the other input voltage options is
selected.
Site Wiring
Fault Alarm
On (default) Alarm sounds when the polarity of the outlet is reversed or
the ground connection is missing; have a qualified
electrician repair the outlet wiring.
Flashing* Alarm DOES NOT sound when the polarity of the outlet is
reversed or the ground connection is missing.
* For 230V models, Site Wiring Fault is not available (flashing
is the only status).
AC Input
Failure
On (default) Alarm sounds when there is an AC input failure.
F
a
i
l
u
r
e
Flashing Alarm DOES NOT sound when there is an AC input failure.
NOTE 208V nominal input voltage is available. Contact the Help Desk at one of the telephone numbers on page 60 for
assistance.